1. Home

L8-70 M (Beckman)

The Beckman L8-70M ultracentrifuge has 3 modes of operation, manual, automatic and programmed. In manual mode, the L8-70M will run all individual run conditions which the user has specified prior to initiating the run. In automatic mode, a run can be repeated in sequence without having to re-enter any run parameters. In the Beckman L8M’s programmed operation, exact duplications of runs can be executed at any time. Programmed operation utilized the Beckman L8M series’ Memory-Pac™ storage mopicdule. 

A digital display, indicates vacuum level, rotor speed, rotor temperature, run time remaining or elapsed , and accumulated centrifugal effect (ω2t). Actual operation conditions of the instrument are displayed unless either the system is in input mode, or display toggle is set away from display mode. IN this case the selected values for the run show for 5 seconds. 

The Beckman L8-70M in general, features touch switches which operate with light finger pressure. An audible beep and green LED indicator signals when each switch is activated. LEDs also signal when the instrument reaches set values during the operational run. 

Product Description 

  • Microprocessor control (accuracy within ± 20 RPM) 

  • Precise chamber temperature control (0-45°C, ± 1 degree accuracy ) 

  • Rotor imbalance and automatic maximum speed detection 

  • 10 acceleration/deceleration profiles 

  • Heavy duty refrigerated induction motor and drive 

  • 70,000 rpm and up to 500,000 x g (rotor dependent) 

  • Vacuum encased induction drive chamber 

  • GMI Offers Installation & Training From Our World-Class Beckman Trained Engineers 

  • Full Proof of Performance Certification Included 

There are 4 - L8-70 M  (Beckman)  in the Facility:  



Reserve on  Bookit 

  •  

    Beckman L8-70 M (1)

    A digital display, indicates vacuum level, rotor speed, rotor temperature, run time remaining or elapsed , and accumulated centrifugal effect (ω2t). Actual operation conditions of the instrument are displayed unless either the system is in input mode, or display toggle is set away from display mode. IN this case the selected values for the run show for 5 seconds.

    The Beckman L8-70M in general, features touch switches which operate with light finger pressure. An audible beep and green LED indicator signals when each switch is activated. LEDs also signal when the instrument reaches set values during the operational run.

    The Beckman L8-70M ultracentrifuge has 3 modes of operation, manual, automatic and programmed. In manual mode, the L8-70M will run all individual run conditions which the user has specified prior to initiating the run. In automatic mode, a run can be repeated in sequence without having to re-enter any run parameters. In the Beckman L8M’s programmed operation, exact duplications of runs can be executed at any time. Programmed operation utilized the Beckman L8M series’ Memory-Pac™ storage module.

    Product Description

  • Microprocessor control (accuracy within ± 20 RPM)
  • Precise chamber temperature control (0-45°C, ± 1 degree accuracy )
  • Rotor imbalance and automatic maximum speed detection
  • 10 acceleration/deceleration profiles
  • Heavy duty refrigerated induction motor and drive
  • 70,000 rpm and up to 500,000 x g (rotor dependent)
  • Vacuum encased induction drive chamber
  • GMI Offers Installation & Training From Our World-Class Beckman Trained Engineers
  • Full Proof of Performance Certification Included

  • Beckman L8-70 M (3)

    A digital display, indicates vacuum level, rotor speed, rotor temperature, run time remaining or elapsed , and accumulated centrifugal effect (ω2t). Actual operation conditions of the instrument are displayed unless either the system is in input mode, or display toggle is set away from display mode. IN this case the selected values for the run show for 5 seconds.

    The Beckman L8-70M in general, features touch switches which operate with light finger pressure. An audible beep and green LED indicator signals when each switch is activated. LEDs also signal when the instrument reaches set values during the operational run.

    The Beckman L8-70M ultracentrifuge has 3 modes of operation, manual, automatic and programmed. In manual mode, the L8-70M will run all individual run conditions which the user has specified prior to initiating the run. In automatic mode, a run can be repeated in sequence without having to re-enter any run parameters. In the Beckman L8M’s programmed operation, exact duplications of runs can be executed at any time. Programmed operation utilized the Beckman L8M series’ Memory-Pac™ storage module.

    Product Description

  • Microprocessor control (accuracy within ± 20 RPM)
  • Precise chamber temperature control (0-45°C, ± 1 degree accuracy )
  • Rotor imbalance and automatic maximum speed detection
  • 10 acceleration/deceleration profiles

  • Beckman L8-70 M (4)

    A digital display, indicates vacuum level, rotor speed, rotor temperature, run time remaining or elapsed , and accumulated centrifugal effect (ω2t). Actual operation conditions of the instrument are displayed unless either the system is in input mode, or display toggle is set away from display mode. IN this case the selected values for the run show for 5 seconds.

    The Beckman L8-70M in general, features touch switches which operate with light finger pressure. An audible beep and green LED indicator signals when each switch is activated. LEDs also signal when the instrument reaches set values during the operational run.

    The Beckman L8-70M ultracentrifuge has 3 modes of operation, manual, automatic and programmed. In manual mode, the L8-70M will run all individual run conditions which the user has specified prior to initiating the run. In automatic mode, a run can be repeated in sequence without having to re-enter any run parameters. In the Beckman L8M’s programmed operation, exact duplications of runs can be executed at any time. Programmed operation utilized the Beckman L8M series’ Memory-Pac™ storage module.

    Product Description

  • Microprocessor control (accuracy within ± 20 RPM)
  • Precise chamber temperature control (0-45°C, ± 1 degree accuracy )
  • Rotor imbalance and automatic maximum speed detection
  • 10 acceleration/deceleration profiles
  • Heavy duty refrigerated induction motor and drive
  • 70,000 rpm and up to 500,000 x g (rotor dependent)
  • Vacuum encased induction drive chamber
  • GMI Offers Installation & Training From Our World-Class Beckman Trained Engineers
  • Full Proof of Performance Certification Included

  • Beckman L8-70 M (5)

    A digital display, indicates vacuum level, rotor speed, rotor temperature, run time remaining or elapsed , and accumulated centrifugal effect (ω2t). Actual operation conditions of the instrument are displayed unless either the system is in input mode, or display toggle is set away from display mode. IN this case the selected values for the run show for 5 seconds.

    The Beckman L8-70M in general, features touch switches which operate with light finger pressure. An audible beep and green LED indicator signals when each switch is activated. LEDs also signal when the instrument reaches set values during the operational run.

    The Beckman L8-70M ultracentrifuge has 3 modes of operation, manual, automatic and programmed. In manual mode, the L8-70M will run all individual run conditions which the user has specified prior to initiating the run. In automatic mode, a run can be repeated in sequence without having to re-enter any run parameters. In the Beckman L8M’s programmed operation, exact duplications of runs can be executed at any time. Programmed operation utilized the Beckman L8M series’ Memory-Pac™ storage module.

    Product Description

  • Microprocessor control (accuracy within ± 20 RPM)
  • Precise chamber temperature control (0-45°C, ± 1 degree accuracy )
  • Rotor imbalance and automatic maximum speed detection
  • 10 acceleration/deceleration profiles
  • Heavy duty refrigerated induction motor and drive
  • 70,000 rpm and up to 500,000 x g (rotor dependent)
  • Vacuum encased induction drive chamber
  • GMI Offers Installation & Training From Our World-Class Beckman Trained Engineers
  • Full Proof of Performance Certification Included
  •  
  • Heavy duty refrigerated induction motor and drive
  • 70,000 rpm and up to 500,000 x g (rotor dependent)
  • Vacuum encased induction drive chamber
  • GMI Offers Installation & Training From Our World-Class Beckman Trained Engineers
  • Full Proof of Performance Certification Included